Thoughtsofanidlemind's Blog

80 responses to “Welcome to Tony Redmond’s blog”

1. 

   Lars Svendsen

   July 24, 2010

   Hi Tony,

   Have you considered to enable rss or atom feeds on your blog? It will make it easy to follow it.

   Cheers,
   Lars

   Reply
   1. 

      Tony Redmond (“Thoughts of an Idle Mind”)

      July 24, 2010

      http://en.wordpress.com/features/rss-2/ explains how to get a feed from any wordpress blog. Looks like all you need is https://thoughtsofanidlemind.wordpress.com/feed/

      Reply
2. 

   Shane Mascal

   August 22, 2010

   Hi Tony,

   I understand that you and Paul Robichaux will conduct 2 “Mastering Exchange 2010” training sessions in October.

   My company is currently working with Exchange 2003, and we are going to impliment Exchange 2010. Currenty the physical server is on its last leg. And we are drastically running out of space, due to bad size policies and basically bad management (I have only been there for 4 months). Therefore we plan to impliment exchange 2010 in the next month.

   I would really love to attend your training, but I fear that by the time of your training we would have already implimented exchange 2010 (or would be in the advanced stages) .

   Are any of you having a similar a training session in September or you know of a reputable training instutuion?

   Reply
   1. 

      Tony Redmond (“Thoughts of an Idle Mind”)

      August 22, 2010

      Hi Shane,

      Paul and I are certainly open to the idea of running another event in Europe but the logistics just don’t make it possible to do so in September. Sorry!

      Maybe you can juggle your dates and come over to Boston ready to have your implementation plan challenged with some of the thoughts that we would lay on the table?

      TR

      Reply
3. 

   Shane A. Mascal

   October 5, 2010

   Hi Tony,

   I am please to say that I have registered for the course and I’m really really looking foward to it. Hoping to emerge from the training as an Exchange Pro 😉 !!

   Reply
4. 

   Tony Redmond (“Thoughts of an Idle Mind”)

   October 5, 2010

   Good stuff. The more that come along the merrier! I think that we’ll have a good crowd in both Boston and Anaheim and I am really looking forward to the experience. The only problem that we have is too much material! I shall be struggling to get through it all, but I guess that’s a good problem to have.

   TR

   Reply
5. 

   Geoff Robb

   November 17, 2010

   Glad to see your mind isn’t that idle since leaving HP, Tony. Greetings from a “bad-penny” that turns up from your e-mail past and I’m glad to see you continuing in the limelight.

   Thanks for the advice about rugby for my cousin’s son. He is now playing for Biarritz’s junior team in south-eastern France.

   Drop by and see us if you’re in Valbonne.

   Cheerz, Geoff.

   Reply
6. 

   Bernd Kruczek

   December 17, 2010

   Hi Tony,
   great book! As ever since your first book about Exchange 5.5. And I don’t usually retain IT Books, but yours are all in one row. And it was nice to meet you at the long gone Exchange Conference in autum 2000 in Nice.

   Bernd

   Reply
7. 

   Tony Redmond (“Thoughts of an Idle Mind”)

   December 17, 2010

   Hi Bernd,

   Thanks for your note. My first book was actually about Exchange 4.0 way back in 1996 but you seem to have formed a nice collection of everything published since! And MEC in Nice has many happy memories…

   Cheers,
   Tony

   Reply
8. 

   Bill

   December 21, 2010

   Hi Tony; do you happen to have a guide on how to move mailboxes and calendar items from gmail “apps for domains” to exchange 2010? I have MAPS and want to learn exchange the “easy” way…by installing SBS2011. 🙂 (You’d think that after 22 years in the IT industry as an admin I’d have learned something about exchange by now, but I guess now is better than never!) Currently we have about 5 gmail addresses that I’d like to move in-house, so it should be fairly straight forward.

   Thanks!

   Reply
9. 

   Tony Redmond (“Thoughts of an Idle Mind”)

   December 21, 2010

   Hi Bill,

   I don’t have any magic to move Gmail to Exchange 2010. I guess you could connect Outlook to Gmail via IMAP and drag and drop messages to a PST and then import them into Exchange…

   TR

   Reply
10. 

    Bill

    December 22, 2010

    Thanks Tony; that method was suggested on another site, and your advise sounds like confirmation to me. I’ll try it that way! 🙂

    Reply
11. 

    John Thompson

    January 11, 2011

    Hi Tony,

    Great blog, mixing a couple of topics I’m interested in e-mail and rugby. Not your usual happy bedfellows but it works well.

    I followed your link to the Exchange 2010 Maestro Seminars above but it just says I don’t have access to the content on the Windows IT Pro site. I wondered if you are able to blog the details of the London seminar?

    Many thanks

    John

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       January 11, 2011

       Hi John,

       Glad that you like the blog. As to the London seminar, I believe that the folks at Penton Communications are busy looking for the right location for the event. The last I heard, we are looking at a mid-June 2011 date. Stay tuned for more information.

       – Tony

       Reply
12. 

    Scott Bueffel

    January 26, 2011

    Tony, I purchased your book last week from Amazon (hard copy…who would pay more for Kindle edition when you get free access to e-version through Safari?). Thank you so much for giving 400-level information that MS doesn’t even document. I have a piece of helpful info for you related to command editing in PowerShell. On page 97 you talk about the F7 key and how it executes immediately, and how using the up/down arrows can be more convenient when wanting to edit the command before executing it. But you can do this with the F7 functionality by selecting the command you want and then pressing the right arrow key (instead of Enter). This adds the command to the prompt without executing it so you can edit it before pressing Enter.

    Scott

    Reply
13. 

    PaulH

    June 15, 2011

    Hi Tony,

    Just a note of appreciation. I was quite happy to see I was not the only one running on a laptop. I setup a 2008SP2 & Exchange 2010 environment on my laptop with a domain of mine at home to study for a job I really want at MS. I moved to Western WA 4 years ago working my way toward a job here where I would enjoy myself and have a great challenge and a team of people I enjoy working with. Typically reading is not my absolute favorite method of learning as real world experience is a much higher impact. Thankfully Exchange Sever 2010 inside out is great for me to read keeping me moving and interested I can hardly get through it without needing to jump to the laptop to look into it and discover more.

    I enjoy the approach in the book personally. Hopefully I will see you in the future developing myself further into my dream job.

    Thank You
    Paul.

    Reply
14. 

    Pablo Ratz

    June 22, 2011

    Hi Tony,

    I’m working with a customer advising them about the mailbox that is created during the setup of the mailbox role in Exchange 2010. As you know, the account used during setup is mail-enabled and now the customer wants to know if it’s safe to disable that mailbox. On your book, you explain:

    ““RBAC relies on mail-enable accounts to manage its role definitions, which is why the account that you use to install the first mailbox server in n Exchange 2010 organization is authomatically mail-enable” ……“ accounts that are not mail enable still cannot run EMS or EMC”.”

    I’ve been testing and starting Ex2010 SP1 administrative tasks are successfull using non-mail-enabled accounts. Could you provide me more details about your statement on the book? I’m assuming this is because of the RTM requisite to be mail-enabled in order use ECP? Please let me know.

    Thanks in Advanced.

    PS: Congratulations for your book. It’s a great source of information.

    Pablo.

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       June 22, 2011

       Hi Pablo,

       Thanks for your kind words about the book.

       EMS and EMC both rely on RBAC to establish the scope of work that a user can do with Exchange and do this by establishing a session that loads in the PowerShell cmdlets authorized by the user’s roles. ECP is different and Microsoft changed it in SP1 to permit some tasks to be performed by accounts that are not mail-enabled. See the bottom of page 235. This allows for administrative accounts who don’t have a mailbox to perform some tasks… but of course, you’ll need to access EMC or EMS to perform some common tasks such as setting up mailboxes, so ECP is really only suitable for certain administrative roles such as help desks,

       TR

       Reply
       1. 

          Pablo Ratz

          June 22, 2011

          Tony, thanks for the quick reply! I’m trying to advise a scenario with mail-disabled administrators, so this is my last question: Could you mention any admin task that requires to be performed by a mail-enabled administrator in SP1?

          Regards.

       2. 

          Tony Redmond (“Thoughts of an Idle Mind”)

          June 22, 2011

          Create a new mailbox?

          Assign Send As or Send As Behalf Of permissions…

          – Tony

15. 

    Lu

    August 27, 2011

    Hi Tony,

    I really enjoyed your book and it was really useful during my studies for the Exchange MCITP exams.
    I am running into an scenario for which we haven’t been able to get a straight answer yet in order to solve the problem. We want to Block Unauthorized Devices (iphones,droids,tablests, etc.) from accessing OWA and caching corporate emails. We would like to use AS but we need to find a way to stop this type of unauthorized connections from happening.

    We have an opened discussion at:

    http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/3f94fe7c-8962-4703-b433-b01268520685

    If you have time we would strongly appreciate your opinion about this one.

    Thank you!

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       August 27, 2011

       To be clear, we’re discussing the need to stop users running a web browser on their phones to use the basic version of OWA to access their mailboxes. The technical answer is that there is no equivalent of ActiveSync device policies (which is what you’d need to block on the basis of device family or type). However, I suspect that this is a case where technology should not be used to address a problem that is simply bad user behaviour. If people are compromising corporate security by connecting to resources with unauthorized devices they should be warned about the consequences of this action and then penalized for a subsequent offence with disciplinary action, including (in my book) the loss of any ability to connect a mobile device by blocking their access to OWA (HTTP).

       You can argue that Microsoft should provide granular access to HTTP for mobile devices but I think that’s seeking to use technology to address an edge case. The vast majority of mobile access is through ActiveSync, which is designed for that purpose. OWA is designed for web browser access. OMA is being reintroduced in Exchange 2010 SP2 to provide a simplified browser access for mobile devices that cannot connect with ActiveSync, but I don’t believe that OMA comes along with the kind of granular access policies that you need.

       TR

       Reply
16. 

    Mary

    February 22, 2012

    I have a “simple” question that I cannot find the answer to anywhere I’ve looked. Perhaps you’d be a sport and perhaps answer it?

    All I want to know is: How does Exchange 2010 store attachment files sent to multiple recipients? For example, I send an email with an attachment to 5 people. Is that attachment stored for each recipient (i.e. 5 times), or is a single instance stored and the 5 recipients simply get a pointer to the stored attachment.

    Would greatly appreciate any help/pointers/clarifications. Thanks!

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       February 22, 2012

       Simple answer to a simple question. Exchange 2010 made a change in its database schema so that all items belonging to a mailbox (messages and attachments) are stored in tables specific to the mailbox. In previous versions, Exchange used tables that were shared between the mailboxes in a database. The loss of the “Single Instance Storage” (where pointers are used to shared content) was felt to be a good thing because of the way that databases are used today. For more information, you can see Exchange 2010 Inside Out.

       TR

       Reply
17. 

    Mary

    February 23, 2012

    Much appreciated, thank you!

    Reply
18. 

    David Clavin

    June 17, 2012

    Hi Tony,

    You refereed a Clongowes – Blackrock SCT game I played in in 2000, which I though you managed extremely well. I always had one question about one of the decisions you made in the game; the ball was passed out from the scrum half to an outside runner at speed, the receiver didn’t get his hands up in time and the ball whacked off his shoulder and went miles forward. You waved play on. Is this not a knock on?

    Only joking, I never really saw you ref after that game and I always though you were a good ref so I was wondering what became of you. Just wanted to say that I found you a very fair referee who always allowed the game to be played if both teams wanted it that way. It’s good to also see that you have another one or two achievements to your bow.

    David

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       June 17, 2012

       Hi David,

       Thanks for the comment. I always enjoyed SCT games at Donnybrook (or Lansdowne Road) as outside European games, they were the hardest matches to referee if you had two quality teams on the pitch. Rock v Clongowes comes into that category!

       With respect to the decision, you can’t knock-on from your shoulder. Law 12 http://www.irblaws.com/downloads/EN/Law_12_EN.pdf says:

       “A knock-on occurs when a player loses possession of the ball and it goes
       forward, or when a player hits the ball forward with the hand or arm, or when the
       ball hits the hand or arm and goes forward, and the ball touches the ground or
       another player before the original player can catch it.”

       So hitting off a shoulder is like a ball going forward off your head – play on.

       Cheers,
       Tony

       Reply
19. 

    Brian Gildea

    June 25, 2012

    Tony–
    Bill Hancock, the late Cable & Wireless (and ex-DEC) security guru, called Windows “a virus with a GUI.”
    Thanks,
    Brian Gildea

    Reply
20. 

    Ray Keeton

    August 17, 2012

    Tony,

    In your book “Microsoft Exchange Server 2010 Inside Out”, page 795, you state the CalendarRepairSchedule parameter “will check user calendars and fix any problems it finds”

    However when reading the Microsoft published “Set-MailboxServer” help document, it states “The CalendarRepairSchedule parameter specifies the intervals each week during which the Calendar Repair Assistant applies checks for calendar failures.”

    What’s the spin and clarificaiton on this specific parameter and how it interacts with the other Calendar Repair Assistant parameters?

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       August 17, 2012

       The book actually says:

       CalendarRepairSchedule: Establishes a schedule when the CRA will check user calendars and fix any problems that it finds. If the CRA can’t finish during the set time, it will restart at the place where it finished the next time a scheduled window opens up. If no schedule is set, the CRA won’t run.

       Set-MailboxServer help says:

       The CalendarRepairSchedule parameter specifies the intervals each week during which the Calendar Repair Assistant applies checks for calendar failures.

       I think both say pretty well the same thing because the book implies that the properties are set through Set-MailboxServer (the example immediately preceding uses Get-MailboxServer to retrieve the properties).

       TR

       Reply
       1. 

          Ray Keeton

          August 17, 2012

          there is conflict in use of the word “fix” (in the book) versus “check” (in the help document)

          my interpretation is the “check” will perform the mailbox scan looking for qualified candidates to flag for the ‘fix” . . . thus separate parameters by tandem use of the other parameters ”CalendarRepairWorkCycle” and “CalendarRepairWorkCycleCheckpoint”

          is my interpreation incorrect?

       2. 

          Tony Redmond (“Thoughts of an Idle Mind”)

          August 17, 2012

          It’s the CRA that does any fixing that’s required. All we’re discussing is establishing a time during which the CRA can run to do the checks and fix anything that it finds wrong. It’s three years or so since I wrote that part of the book and it’s a while since I looked into the CRA in any depth, but I think that I’m right in saying that Set-MailboxServer -CalendarRepairSchedule has nothing to do with any fixing.

          CalendarRepairWorkCycle establishes a desired period during which the CRA should process every mailbox on a server. The example given is 7 weeks. Thus, whatever happens, CRA is supposed to get through every mailbox at least once per week. This is part of the overall move from Exchange 2010 SP1 onwards to have the background assistants operate on a planned “do this amount of work in that period” basis rather than the old approach of “keep working for this amount of time nightly”.

          I really can’t say that much more because I haven’t looked into CRA in any depth recently. It’s just one of those less important parts of Exchange – or rather, one that doesn’t get much respect.

          TR

          TR

21. 

    Scott

    August 23, 2012

    Tony, you wisely don’t have an email address for you anywhere on your site (that I can find), so I am posting here. You recently posted on WinIT Pro about the lack of context menus in EAC and you made a reference to a verbal faux pas you made at MEC 2000. I followed your link and read your past article on MEC from 2010. What I can’t figure out is why that is a faux pas. I have reread your paraphrased quote several times and can’t figure out what the mistake was. Was it because one or more words might have been misheard as something else, e.g., vulgarity? I took it exactly as I believe you intended: the audience was excited about feature that you only were mentioning but had no involvement in implementing, so you would tell the product team how happy everyone was. I must be overlooking something obvious if you immediately knew you may have erred.

    Scott

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       August 23, 2012

       Vulgarity is the issue. Offering to give “the clap” to the Exchange development group might be construed to offer to engage in unsanitary behaviour… But what should I know about that?

       TR

       Reply
22. 

    zbycha

    December 16, 2012

    Hi Tony,

    First I would like to thank you for the book Exchange 2010 Inside Out! I am on page 915 it and I wonder your chapter about Edge subscription. As far as I remember I was configuring Edge subscription some time ago (on 2007 and also on 2010) where I´ve had 2 EDGE servers and 2 HUB servers in place all in single site. I have to make two subscription xmls (on both EDGE servers and import those to each HUB) Otherwise subscription was working against 1 EDGE only. Is this correct approach? Once the subscription was made on 1 HUB only, there was no load balancing of incoming SMTP traffic.

    Thanks
    Thanks Zbynek (zbynek.salon at salonovi.cz)

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       December 16, 2012

       Hi,

       Are you talking about load balancing for incoming messages that should be handled by the two Edge servers? If so, shouldn’t you have your MX records pointing to the two Edge servers?

       If you’re talking about balancing the outgoing mail flow from the hub transport servers through the edge servers, this should happen automatically. At least, that’s how I think it should happen. At least, that’s what a quick browse of the Internet turns up at http://technet.microsoft.com/en-us/library/bb266920(v=exchg.80).aspx (applies to Exchange 2010 too).

       If this doesn’t work for you, you might have to log a call with Microsoft.

       TR

       Reply
23. 

    Payton01

    December 19, 2012

    Hi Tony,
    I’m currently using a Transport rule in Exchange 2010 to allow 250 users to send/receive large attachments. I recently found the rule is using the RMS service and it requires an Exchange Enterprise CAL for each mailbox. Is their another way of doing this without having to purchase a Enterprise CAL?

    thanks,
    payton

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       December 19, 2012

       What is the rule and how is it using RMS?

       TR

       Reply
24. 

    Payton01

    December 19, 2012

    the transport rule uses RMS to send a rejection message “email exceeds message size limit 5.7.1” to all users except when the message is to/from a member of a distribution list.

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       December 19, 2012

       But why use RMS? I created a transport rule that does the same thing and it doesn’t need RMS…

       Description : If the message:
       The message size is larger than or equal to ‘2.441 MB (2,560,000
       bytes)’
       Take the following actions:
       reject the message and include the explanation ‘Message Too Large’
       with the status code: ‘5.7.1’
       Except if the message:
       Is received from a member of group ‘Execs@contoso.com’

       RuleVersion : 15.0.0.0
       Conditions : {MessageSizeOver}
       Exceptions : {FromMemberOf}
       Actions : {RejectMessage}
       State : Enabled
       HasSenderOverride : False
       MessageSizeOver : 2.441 MB (2,560,000 bytes)
       ExceptIfFromMemberOf : {Execs@contoso.com}
       RejectMessageEnhancedStatusCode : 5.7.1
       RejectMessageReasonText : Message Too Large
       Identity : Stop large messages
       Name : Stop large messages
       IsValid : True

       Reply
25. 

    Payton01

    December 19, 2012

    It was created by one my Engineers. I noticed the other day if you check any boxes on the Actions window when setting up a Transport Rule, Microsoft has a note at the bottom “Rights Management Service (RMS) is a premium feature that requires an Exchange Enterprise CAL for each user mailbox. I’ll discuss your rule with my engineer.

    Thanks.

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       December 19, 2012

       I think that’s just a note to say that if you use RMS, you need an enterprise CAL. I see no reason for RMS in this case.

       TR

       Reply
26. 

    Payton01

    December 19, 2012

    I understand what your saying. I assumed RMS had been setup.

    Thanks.

    Reply
27. 

    Yogita Aggarwal

    May 14, 2013

    Hello Tony,

    I stumbled upon your work through Google Search and found quite a bit of useful information. The information you provide give a deep insight about tech products and services. Encompassing the detailed feature-set and evaluating the products on the grounds of sheer relevancy, your articles are read and trusted by a vast audience. I would like appreciate if you can have a look at our product. For a fair competency test of the product, we would gladly facilitate a product license key.

    If interested please let me know your email id so that i can mail you all other details.

    Hope to hear from you soon.

    Thank you for your time and consideration.

    Regards,
    Yogita Aggarwal

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       May 14, 2013

       Sorry, but I don’t do product reviews unless I actually use a product. Thanks for making contact.

       TR

       Reply
28. 

    rares potocean

    July 12, 2013

    Hello Tony, we are working with 2010 in a mixed environment of clients (windows / mac). In our troubleshooting steps for a case that meeting invites were not delivered to users, we stumble across an “undocumented” (or at least undocumented for us) eventid in messaging tracking logs. The eventid shows as “PROCESS” and the source is STOREDRIVER . the tracking log shows the message as being received by the transport server
    RECEIVE | SMTP | sender@contoso.com | recipients@fabrikam.com
    then storedriver
    PROCESS | STOREDRIVER | sender@contoso.com | recipients@fabrikam.com
    we have noticed those messages never appear in the recipient mailbox or they are delayed for days..

    Would you have any info about this “PROCESS” EVENT ID?
    Thank you
    R

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       July 15, 2013

       Sorry. I’m unaware of the reason behind these entries. Sounds like a question to ask Microsoft.

       TR

       Reply
       1. 

          rares potocean

          July 15, 2013

          Thank you.

29. Беседа с Перри Кларком | ILYA Sazonov: ITPro

    January 12, 2014

    […] Тони Редмонт – уникальный человек и уникальный специалист, который знает о системах электронной почты и об Exchange и очень много, и очень рано (раньше многих). Автор нескольких книг и множества иных публикаций по Exchange Server. […]

    Reply
30. 

    Raj

    May 29, 2014

    Hi All,

    I would like to know about specific concept about reclaiming whitespace.

    When i move some 10 GB (assume 10 x 1 GB) of mailboxes from DB1 to DB2. Whereas the DB2 has 50 GB of whitespace, will exchange use this whitespace for the new mailboxes moved to DB2.

    I know for the existing mailbox growth on DB2 the whitespace will be used, but would like to know about the mailbox moved from other store to the target store (with whitespace) ?

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       May 29, 2014

       Exchange will use database whitespace for all transactions, whether they are messages generated by existing mailboxes or items in mailboxes being moved to a database.

       TR

       Reply
       1. 

          Raj

          May 29, 2014

          Thanks a lot Tony

          I didn’t get a strong answer from most of my exchange champs:(

          Just i was confused if the moved mailbox will occupy the whitespace in new DB.
          So this applies for all exchange 2003 and 20XX ?

       2. 

          Tony Redmond (“Thoughts of an Idle Mind”)

          May 29, 2014

          Yes, all moved mailboxes are treated as transactions coming into the Store and will therefore be dealt with like any other transaction. If white space is available, it will be used. Later versions of Exchange are more efficient and better at using this space, but the same principle applies.

31. 

    Steve Bryant

    November 5, 2014

    Great Book Tony.

    All of your Exchange books have offered informative details of the inter-workings of Exchange but the Inside Out: Microsoft Exchange Server 2013: Mailbox and High Availability goes a bit deeper into the store processes and I thank you for it. You always seem to have a inside-line to information that could come only from the development team and this book seems to have more than usual of these little gems.

    At any rate, I am thoroughly enjoying the book and I wanted to drop a note here before I added my comments on Amazon.

    Hope you are enjoying “retirement” and I look forward to your next one.

    -Steve

    Reply
32. Come join the Exchange 2013 information sharing Facebook Group! | Jason (Izzy) Sherry's Blog

    November 5, 2014

    […] you will see the most common poster (and Exchange blogger, writer, etc) is Tony Redmond, who runs two different blogs. Many other Microsoft Exchange MVPs and non-MVPs post links to their […]

    Reply
33. 

    Ian Fischer

    November 15, 2014

    Tony,
    A topic nobody seems to have discussed since Exchange 2007 is DB maintenance. Given E2013’s checkbox to run DB maint 24×7, is it still necessary to coordinate and customize DB schedules so they don’t overlap with each other?

    -Ian

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       November 15, 2014

       The reason why no one discusses this subject any more is that it’s all automatic. You don’t need to set up DB schedules because Exchange will auto-throttle the workload created by background maintenance so that it doesn’t interfere with other server activities. Without this kind of automation, can you imagine setting up DB maintenance schedules for a cloud service (Office 365) that has more than 100,000 Exchange servers?

       Reply
34. 

    Ian Fischer

    November 17, 2014

    Thanks for the quick response! Yes, I kind of figured that but thought I would ask anyway.

    Reply
35. 

    Eire Old Boy

    January 21, 2015

    Tony, Haven’t seen any rugby posts in a while. Will there be any forthcoming?
    Thanks,
    Propus Celtus

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       January 21, 2015

       Alas, I have refereed but two games this season (both schoolboys) and am not very involved in the refereeing administration side either. I stepped down as a TMO some years ago to concentrate on other stuff as well. So I am sadly deficient on the refereeing front at present.

       Reply
36. 

    Joseph

    February 6, 2015

    Mr Redmond, My mind has been anything but idled.
    I work for a small Publishing company and we are heavy on the Macintosh equipment. We decided to start using the 365 for Mac which is wonderful “wait for it”….. except for an outstanding issue with Word. It crashes whenever you attempt to open a document create with a previous version of Word. Opening a .Doc file can cause the user “and administrator” 15 to 30 minutes of headaches each time someone attempts to open a .Doc file.
    Could you please please please ask your team why this hasn’t been “properly” repaired yet, and ask them to do so.
    Thank you!

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       February 7, 2015

       “My team” is me. I have no idea why you are having a problem with Mac Word. Time to file a support incident with Microsoft…

       Reply
37. 

    Paul

    April 9, 2015

    Tony, I am reaching out to you in the hope that you can provide guidance on how we should go about quickly developing a Public Folder migration strategy/plan that makes sense for our firm. With all the noise in the marketplace about what to do, and the often times contradictory guidance from “expert” third parties, it goes without saying that we are confused about how best to move forward. I am not a technician, and we outsource IT. That said, I have a quite deep understanding of the topic and the pitfalls. We really do need to find a way forward before we have an event! We bought into the P F cool aid and let it grow unmanaged for years, and now we are nervous.

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       April 9, 2015

       Did you read the posts on the topic that are scattered around the network including this site? Or maybe listen to the TechEd sessions on the topic? Or do you plan to attend the Public folder migration session at Ignite? The first thing to do is to gather information about the potential workload, then you can focus in and make sense of it.

       Reply
38. 

    Paul

    April 9, 2015

    In that Ignite is sold out, I will opt to view online. Yes, I have done very extensive reading on the subject, including your site. Maybe the challenge in all of this is finding the “better place” – how we get there will become evident once we decide on the better place. Is S P the better place? Archiving? Our requirements are like any other SMB firm.

    Reply
39. My Top 5 Exchange experts to follow and 2 I wish I could – No One Uses Email Anymore

    June 30, 2016

    […] Tony Redmond: No explanation needed here. I have followed Tony since my 5.5 days, and believe me, it makes him nervous. I was there when he announced that he had passed the “Clap” to the Exchange Product Group. I think I should get a t-shirt for that. […]

    Reply
40. 

    Kevin Conway

    February 20, 2017

    Tony,
    I was recommeded to you from someone I talked to at the recent ITDEV Connections Conference. Simple question. Can we change the name of the OneDrive Folder once it has been setup? The issue is that there is a limit on the number of characters that you can have in a path name. Over time people have discovered an issue with creating a structure in the One Drive Directory to maintain their files and they need to change the file structure to not run into this limit.

    I don’t beleve that it is a recommened practive to chante this once it has been setup as it would probably impact something else. What is your opinion on this?

    Thanks,

    Kevin C.

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       February 20, 2017

       You’re probably referring to the 256 character limit in a folder name imposed by SharePoint (https://support.microsoft.com/en-us/help/3125202/restrictions-and-limitations-when-you-sync-files-and-folders).

       I don’t see an issue in renaming folders – I did this a moment ago by renaming a folder in a document library and the OneDrive sync client did the necessary and continued to synchronize. I also renamed a folder in my OneDrive for Business site and that was fine too.

       As always, do your own testing to confirm, but I don’t see an issue.

       Reply
41. 

    James

    March 16, 2017

    Tony I have a stickler that may only be solved by the best of the best… This is why I would like to call on you for a quick answer… OR anyone else who ran into this unique issue.
    Here it is…..
    Exchange 2016 working normally.
    Migrated from Exchange 2010 zero failures
    PF’s migrated to 2016 – again zero failures.
    Everything seems to work well until…..
    All users loose connection to the Public Folders. The reason is KNOWN it is this….
    Public folders use a second connection to the Exchange system to connect the user(s) to the public folder. This is proxied via an account that is created during the setup. In our case this is Mailbox1@…..

    The error is that the Mailbox1@…. address is reverting (i’ll explain below) back to an internal domain address that is not real nor internet viable – all users connect via internet – so this line in the “Test Email AutoConfiguration” tool of Outlook ….

    Mailbox1@internal.wrongdomain.com

    but should be….

    Mailbox1@mail.properdomain.com

    To fix it I open the advanced details of AD Users and Comps tool.. Open the details of the account Mailbox1 and change the attributes for mail addresses… I remove the wrong address and leave the proper one in – changing the smtp to SMTP. This fixes the issue and after about 40 minutes everyone can see the Public Folders once again…. UNTIL TOMORROW! where it reverts to having 2 smtp addresses again….
    SMTP:Mailbox1@internal.wrongdomain.com
    smtp:Mailbox1@mail.rightdomain.com

    I have checked to ensure the rightdomain.com is the default domain. I have had Microsoft Support attempt to fix this now 3 times to no avail… All I need is how to make the address stick permanently so we dont loose connection in tomorrow and tomorrow and tomorrow again and again!

    If anyone has seen or knows how to handle this PLEASE let me know. Email me directly at coogrrr25 at gmail d0t c0m – public email address please dont set it up for spam!

    Thanks Tony and to anyone else who can assist in advance!
    James

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       March 19, 2017

       Wow… Sorry I can’t help – this seems like a real special case.

       Reply
42. 

    Rika

    September 3, 2017

    while formal cases to MS does not yet seems to help, I”m trying my luck with you as I know that you know it all 🙂 inside-out!
    Background:
    we have users that are on in-place hold,everything,unlimited, their MB are on premises with online archive in cloud, Ex2013 CU17.
    retention policy is set to “move to archive” recoverable items > 14days
    The Issue:
    the /Discoveryholds data does not move to archive (we would like to to move it bc of limited storage on-prem)
    and I know its working ok on 2016 but we can not upgrade as we still co-exist with 2007 (bc of legal issues)
    so trying to find a way to migrate that data to online archive.

    found out that if a user MB is set to LitigationHold the data go to /Purges and that folder does move OK to online archive.

    I found that ews is not capable to query /discovery holds on 2007/2010/2013 but can on 2016 so that option is down,
    so I tried to have the MB that is on in-placehold also on litigationhold, I see that new deleted items go to /purges but the original ones stay under /discoveryholds
    I tried to remove the in-placehold and to delete that search completely
    but the in-placehold GUID is keep coming back automatically so basically the in-placehold does not get deleted…

    appreciate any input
    TIA,
    Rika

    Reply
43. 

    Diane Painley

    January 10, 2020

    Hi Tony,
    I’ve been a longtime reader of your blog and have learned quite a bit, thank you!
    I am an O365 and Exchange On Prem administrator at my company and have just received a request from my manager to move all Inbox email dated from 6 months ago to 2 years old to another folder for every mailbox in the organization.
    I a good bit of power shell experience, but not to this level. Is something like this possible without having to put email into a search mailbox first then move to the new folder?

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       January 10, 2020

       I think this will take some custom Exchange Web Services code. The question I’d ask is why the manager wants this to happen. What business purpose lies behind the request?

       Reply
       1. 

          Diane Painley

          January 10, 2020

          We are adding a new retention policy. I presently create a 2 yr retention policy and a 10 yr retention policy through a script for everyone’s mailbox. The retention policy for default folders will be 180 days. As a convenience, management would like me to move their email for them so the users don’t lose email they may want.

       2. 

          Tony Redmond (“Thoughts of an Idle Mind”)

          January 10, 2020

          Move email from where to where? There’s no way to do this with PowerShell as PowerShell doesn’t support the movement of items within user mailboxes. You’d have to write some Exchange Web Services code. See https://docs.microsoft.com/en-us/exchange/client-developer/exchange-web-services/how-to-move-and-copy-email-messages-by-using-ews-in-exchange and the examples that folks like Glen Scales have posted on the net. But I would caution against writing code like this unless you are really sure that this is needed on a long-term basis. EWS code will eventually have to be replaced with Graph-based code when Microsoft deprecates EWS, so that’s another development and maintenance cost to take into account. I would put the effort into user training and education so that they know how to retain mail they need to keep using personal retention tags.

       3. 

          Diane Painley

          January 15, 2020

          It is upper management wants email 6 months – 2 years moved from inbox to a created folder that has a retention tag of 2 years. They have me run a script to add the folder and apply the tag.
          It’s not something that is going to be ongoing, just a one time thing.
          Out of curiosity, how much would this disruption will this cause as far as mail flow?

       4. 

          Tony Redmond (“Thoughts of an Idle Mind”)

          January 15, 2020

          I don’t think it will affect mail flow. There will be some added synchronization between Outlook clients and Exchange to make sure that the OST files reflect the changes made to move messages around, but that’s all.

       5. 

          Diane Painley

          January 15, 2020

          I should mention, the mailboxes are in the cloud

44. 

    Robert Halsey

    May 31, 2020

    Good day Tony! We have met a couple of times in Toronto in the 90’s. I have a Way Back When question regarding Digital ALL-IN-1. During my hay days I wrote several programs in Basic that read or manipulated the A1 data files. The DAF was my favourate because of all the complexities of the various DAF field codes. I figured most of them out through research, testing and analysis..
    Except for some Teamlinks related fields, I have never seen an Official DAF field code documentation.
    Have you ever seen such a document or do you have any?
    (“Thoughts of another retired idle mind”)

    Robert Halsey

    Reply
    1. 

       Tony Redmond (“Thoughts of an Idle Mind”)

       May 31, 2020

       Hi Robert… I don’t have any ALL-IN-1 SDAF documentation at this remove. Maybe Nigel Dutt might have some. He’s available on Facebook…

       Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.